The Yuasa YuMicron gives you a powerful advantage. Its high technology separators allow two extra plates per cell to be installed, for a 30% improvement in cranking performance. This added power is an outstanding benefit for heavily accessorized machines or high compression engines. Its high cranking power is also a real bonus for easier starting.
These features are built into our conventional manifold vented battery - and every battery in the YUASA line: -Patented separators provide high cranking power -Through-partition construction delivers maximum power. -Unique sealed posts resist corrosion for longer battery life. -Polypropylene cover and container thwart damage from gas, oil, and impact. -Heat-sealed, bonded unit fabrication protects against seepage and corrosion.
Comes with pre-measured acid tubes that customer easily empties into battery.
Includes a seal that is then placed across the top of the battery to create a sealed, spill-proof battery.
Customer must add acid (acid not included)and charge manually or through their local dealer before installation.
If the customer wants to manually fill the battery, they are advised to wait an additional 10 minutes between adding the acid and sealing the battery, to prevent cracking the shell.
Never needs refilling but may need periodic charging.
The YTX20 series batteries may be used as an optional upgrade, but some modification to the hold down may be necessary. See battery label for retrofit cautions.